3 Steps to Designing Your Horse Fence

Posted on February 25, 2018 By

Deciding to build a horse fence is the easy component. The next step is putting this on paper, then buying and setting up the best fence you can afford. Someone recently requested help in designing plus choosing a horse fence. This will be how we did it.

Put this on paper

Sit lower and draw the past you will be secure fencing on paper. It may or may not be square. One important thing to keep in mind when having your fencing is that any part that is less than 90 degrees ought to be rounded or cross-fenced. You usually do not want a corner that your horse might get trapped in.

Also tag your gates. Make sure you consider your future needs when you plan entrances. Have at least one gate big enough to get equipment through. Mark all of them on your drawing.

If you believe you may want additional gates later, tag them now so you can include the extra posts needed. You do not possess to put the gates in right now, you can simply fence over them — and add a gate later.

Add the total of all four edges to get the total lineal foot. If your horse pasture will be perfectly square, you will have 840 foot – but I do not understand anyone with perfectly square horse pastures. Our new one acre equine pasture came to 880 lineal feet.

Now that you have the particular lineal feet, multiply that from the number of rails or strands you may be using.

She did not possess a lot of money for this project, so we determined to use 3 strands associated with electric rope at. 09 mere cents per foot and one rail associated with 4. 25 inch flex-fence in. 70 cents per foot. We designed it so that the top follicle was electric rope to decrease the horse from leaning on top of the fence. Under that emerged the 4. 25 flex railroad to strengthen the fence plus make it more visible to the girl horse. The bottom two hair strands were electric rope. The discourges pests from outside and maintains her horse from pushing around the bottom rail to get to "greener grass" under the fence (and finding yourself breaking the fence).

What' h it gonna cost?

To get the total cost for your rails, we multiply 3 (strands) times 880 (feet / electrical rope) times. 09 (cost from the rope per foot)

(3 X 880 X. 09 sama dengan 237. 60). She spent dollar 237. 60 for the three hair strands of electric rope.

Add to that the length of one railroad of flex fence. (70 times 880 = 616). She invested $ 616 for the one railroad of flex fence. Whew! Kind of expensive considering she obtained three strands of electric string for less than half that! But, it had been what she wanted.

Many people get along just fine with electrical rope or tape. You determine whether you need it or not. Had she gone with just 4 strands of electric rope, the girl total rail cost for the whole meadow would only be (4 Times 880 X. 09 =) dollar 316. 80. She would conserve over $ 500 by using 4 strands of electric horse fencing and not buying the flex fence. Again, that extra $ 500 was obviously a bargain if it made her sense safe.

Since her fencing was going to be 55 " high, the space between the cables was about a foot (with the first a foot off the ground). makes use of between 10 and 12 in . of space.

What regarding the fence posts?

The closer the spacing, the more powerful the fence will be. Since the girl wanted to use the flex fencing, we decided to go with 10 foot spacing between the posts. Had she been using only electric string, I would have suggested 12 — 15 foot spacing. I have observed people use 20 – 25 foot spacing when using electric string. ElectroBraid claims you can space you up to 50 feet aside using their brand. I would still suggest a smaller spacing.

Because the lady was using the flex fence, t-posts were not an option. We decided that will she needed 98 posts. (880 feet divided by 10 feet spacing) PLUS 10 posts with regard to corner bracing and gates.

She got a really good deal upon 4 " round wooden articles. She bought 110 posts with regard to $ 300.

Typically articles should be set at least 36 in . deep. Corner posts and entrances should be set deeper because of the additional stress they are subjected to.

Extra notes:

  • End, corner and gate posts require to be longer than the additional posts as they need to end up being set deeper.
  • Corners plus ends should be braced.
  • If you use t-posts with horse fencing, buy t-post toppers. They price under a dollar each, but assist protect your horse from injuries.
  • Never use t-posts within small areas. They should just be used in large areas (if at all).
  • For extremely active horses, space your posts nearer to make the fence stronger.
  • Do not put gates within a corner.
  • If you have just one gate, make sure it is wide plenty of that your equipment will fit by means of.

(**

Backyard FenceDIY Fence TipsFront Yard Fence     , , , ,